By Jim Geier
By definition, a router transfers packets between networks. The router chooses the next best link to send packets on in order to reach closer to the final destination. Routers use Internet Protocol (IP) packet headers and routing tables, as well as internal protocols to determine the best path for each packet. Most routers connect a local area network (LAN), like the one in your home office or small business, to a wide area network (WAN), like the cable system connecting a cable modem, by interfacing a broadband modem to the network within the small business or home office.
A wireless local area network (WLAN) router adds a built-in access point (AP) function to a multi-port Ethernet router. This combines multiple Ethernet networks with wireless connections as well. A typical WLAN router includes four Ethernet ports, an 802.11 access point, and sometimes a parallel port so it can be a print server. This gives wireless users the same ability as wired users to send and receive packets over multiple networks. 802.11b, 802.11a, and 802.11b/a combo WLAN routers are now available from several vendors such as Netgear, D-Link and Actiontec. 802.11g routers are also starting to hit the market.
WLAN Routers vs. APs
There may be some confusion over the difference between WLAN routers and access points. The main thing to remember is that access points allow wireless clients access to a single network, while WLAN routers allow clients to browse a number of different networks. The router always takes the IP address into account to make decisions on how to forward (i.e., route) the packet; whereas, access points generally ignore the IP address and forward all packets.
In addition, WLAN routers implement the Network Address Translation (NAT) protocol that enables multiple network devices to share a single IP address, which are generally provided by the Internet service provider (ISP). WLAN routers also have the ability to provide port-based control, firewall management and Dynamic Host Configuration Protocol (DHCP) services for all devices. These functions make the WLAN router much more versatile than an access point.
Why Use a WLAN Router?
Consider using a WLAN router for the following reasons:
- IP Address Sharing: WLAN routers offer strong benefits in the home and small office setting. For example, you can subscribe to a cable modem service that provides a single IP address through DHCP to the router, and the router then provides IP addresses via DHCP to clients on your local network. NAT then maps a particular client on the local network to the ISP-assigned IP address whenever that client needs to access the Internet. As a result, you need a router if you plan to have more than one networked devices on a local network sharing a single ISP-assigned address. Instead of having one box for the router and another box for the access point, a WLAN router provides both in the same box.
- Connect Multiple Networks: WLAN routers are also ideal for wireless networks in public areas, especially if there are multiple networks that are accessible. For instance, a University may have a separate network in each of its buildings. Students sitting outside might want to gain access one or more of these networks and also surf the Internet. A WLAN router enables them to access everything through the wireless connection.
- Improve Network Management: WLAN routers in an business environment give network administrators an extra way to monitor and update their networks. In addition to being able to log on either locally or remotely via the wired network, they will be able to log on wirelessly and make any observations or changes.
- Improve Network Performance: Because routers only send packets to specific, directed addresses, they do not forward the often numerous broadcast packets that are sent out by other devices. This results in an increase in throughput because of lower utilization on the network and less work needed by the router. This enables WLANs to operate much more effectively. The router, however, will offer more delay than an access point, but the impacts are generally unnoticeable.
- Increase Security: A strong advantage of WLAN routers is that they provide an added layer of security, both on the wired side and wireless side. The wired side is usually protected by a firewall and has extensive access control filters. These filters can be set based on media access controls (MAC), IP address, URL, domain name, and even a set schedule that allows access only at certain times. If an unauthorized user tries to access the network, an e-mail alert is immediately sent to the network administrator. For supporting sensitive information, many WLAN routers support multiple and concurrent IP security (IPSec) sessions, so users can more securely access networks through a range of virtual private network (VPN) clients. Most WLAN routers also implement wired equivalent privacy (SSID), WEP, radio frequency channel, transmit power and other functions such as request-to-send/clear-to-send (RTS/CTS) and fragmentation. Be sure to set the SSID and administrative login user name/password to a non-default value to improve security. For single access point networks, you can probably use the default radio channel, but another channel might be needed to avoid conflicting with other nearby access points. In most cases, set the transmit power to the highest value (usually the default setting). Other settings will depend on application requirements.
A WLAN router is certainly a component to consider for any wireless fidelity (Wi-Fi) deployments. It pulls together the routing and access point functions into a single component that is relatively easy to configure and manage.
Adapted from 802.11 Planet.com.